Petrochemical Products

Methanol

SpecificationHigh-classFirst-classCertified-class
Acidity (with HCOOH) (%)d 0.0015d 0.0030d 0.0050
Basicity (with NH3 ) (%)d 0.0002d 0.0008d 0.0015
Boiling range (include 64.6±0.1°C) / (°C)0.81.01.5
Carboxide (with CH3O) (%)d 0.005d 0.005d 0.010
Chroma(Pt-Co)/Nod 5d 5d 10
Density(20°C)/(g/cm3 )0.791 - 0.7920.791 - 0.7930.791 - 0.793
Moisture content (%)
d 0.10d 0.15
Potassium permanganate (test/min)e 50e 30e 20
Residue envaporation (%)
Washing Test by Sulphate acid / Hazen unit (Pt-Co Colour)		d 0.001< 50Max.d 0.003< 50Max.d 0.005
Water-soluble testPass Test(1+3)Pass Test(1+9)

Phenol

phenol pure 
DescriptionColorless crystal or white crystalline with special odor and burning smell.
Melting point43°C
Boiling point181.7°C
Freezing point41°C
Relative Density1.0576
Refractive index1.54178
Flash point79.5°C

Linear Akyl Benzene

SpecificationSuperior gradeFirst gradeQualified grade
AppearanceWhite transparent liquid, no suspended solidsWhite transparent liquid, no suspended solidsWhite transparent liquid, no suspended solids
Density(20℃),kg/m30.855~0.8700.855~0.8700.855~0.870
Color, Hazen≤10≤20≤100
Distillation range (℃) 5%(VOL)
>280
>280
>270
Distillation range (℃) 95%(VOL)
<310
<315
<320
Br, g Br/100g ≤0.02≤0.03 ≤0.25
Average Molecular weight238~250
238~250
235~250
Refractive index
1.4820-1.4850
1.4820-1.4870
1.4820-1.4890
Useful substance for LAS
≥98.5%
≥97.5 %
≥96.5%
Moisture
 ≤0.01%
 ≤0.01%
0.05%

Dodecyl Benzene (DDB)

Specification 
Physical State at 20°CLiquid
ColourClear
Melting Point/Freezing Point3°C
Flash Point109°C
Boiling Point185°C - 188°C
Initial Boiling Point185°C
Final Boiling Point188°C
Density (g/cm3)0856g/ml at 25°C
Solubility in water (%weight)insoluble in water
Partition coefficient Log Pow octanol/water at 20°C8.65

Caustic Soda

SpecificationFlakes 99%Flakes 98.5%Flakes 96%Pearl
NaOH99% Min
98.5 % Min96% Min99% Min
Na2CO30.4% Max
0.8% Max1% Max0.3% Max
NaCl0.02% Max
0.05% Max2% Max0.015% Max
Fe2O30.005% Max
0.08% Max 0.01% Max0.003% Max
AppearancePure White color, thin and semi-transparent flakes.Pure White color, thin and semi-transparent flakes.Pure White color, thin and semi-transparent flakes.Pure white pearls,Size of pearl: 0.6-0.8mm.

Refined Products

Base Oil

SpcificationsSN150SN300SN500
ASTM Colour1.52.02.5
Density at 15°C (g/cm3)0.890.8850.9
Kinematic Viscosity at 100°C (cSt)5.0 - 5.56.5 - 8.010.5 - 11.5
Viscosity Index959595
Pour Point (°C )-15-15-15
Flash Point (°C )195210240
Sulphur Content
(%m/m) 		0.80.80.8
NOACK Value (%m/m)17134

Fuel Oil

SpecificationDMXDMADMZDMB
Kinematic viscosity at 40°C (mm2/s)1.4 - 5.52.0 - 6.03.0 - 6.02.0 - 11.0
Density at 15°C (g/cm3)0.890.890.90
Cetane index45404035
Sulfur (%weight)11.51.52
Flash point (°C)43606060
Hydrogen sulfide (mg/kg)2222
Acid number (mg KOH/g)0.50.50.50.5
Oxidation stability (g/m3)25252525
Carbon residue: micro method on the 10%
volume distillation residue (%weight)		0.30.30.3

Bitumen

Specification BITUMEN 80/100BITUMEN 60/70BITUMEN 40/50
Specification Gravity @25/25°C1.01/1.061.00/1.051.00/1.05
Penetration @ 25°C80/10060/7040/50
Softening Point (°C)45/5249/5652/60
Ductility @ 25°C CMS100 MIN 00 MIN100 MIN
Loss on Heating (%weight)0.5 MAX0.2 MAX0.2 MAX
Drop in Penetration After Heating (%)20 MAX20 MAX20 MAX
Flash Point (°C)225 MIN250 MIN250 MIN
Solubility in CS@ (%weight)99.5 MAX99.5 MAX99.5 MAX
Density @25° C1.01/1.061.00/1.051.00/1.05

Paraffin Wax

Specification  
Melting point58-60
Oil content (wt%)0.5
Saybolt color+28
Light stability4
Needle penetration (25°C 100g)19
Mechanical Impurity & MoistureNegative

Polymers

PVC Resin

SpecificationG1SG1SG2SG3SG4SG5SG6SG7SG8
K-Value77-7574-73
72-71
70-69
68-66
65-63
62-60
59-55
Viscosity, ml/g156-144
143-136
135-127
126-119
118-107
106-96
95-87
86-73
Average polymerization1350-1250
1250-1150
1100-1000
950-850
950-850
750-650
Number of impurity particle≤3030303030304040
Volatiles content %,≤0.40.40.40.40.40.40.40.4
Appearing density g/ml≥0.420.420.420.420.420.450.450.45
Residual after sieve 0.25mm mesh≤0.20.20.20.20.20.20.20.2
0.063mm l≥9090909090909090
Number of
grain/400cm2≤
4040404040404040
Plasticizer absorbency value of 100g resin2525252219161414
Whiteness %,≥7474747474747070
Residual chlore thylene content mg/kg≤55555555
Ethylidene chloride mg/kg≤150150150150150150150150

LLDPE

SpecificationGrade 1Grade 2Grade 3
Melt Index MI2.16 (g/10min)2.02.02.0
Density (g/cm3)0.9190.9210.922
Melting point (℃)122122122
Brittleness point (℃) <–70 <–70 <–70
Softening point (℃)100100100
Tensile strength at yield (kg/cm2) 100110110
Tensile strength at break (kg/cm2)360
280 280
Elongation at break (%) 600800800
Slip agent level nonemediummedium
Anti blocking agent levelnonemediumhigh

Construction Products

CHE-OXYGLUE-50 Pure Epoxy

Rebar NumberHole Diameter (mm)Hole Depth (mm)Destroy Haul (kgf)Safety Haul (kgf)
#3 (Ø10)139036071202
#4 (Ø13)1612564092136
#5 (Ø16)
2014596953232
#6 (Ø19)25170136554552
#7 (Ø22)28200186726224
#8 (Ø25)32225240328011
#9 (Ø29)37260273649121
#10 (Ø32)402903173010577
#11 (Ø36)423203584311948

Threaded Rod NumberHole Diameter (mm)Hole Depth (mm)Destroy Haul (kgf)Safety Haul (kgf)
M810802338779
M10139031501050
M121612049511650
M162014565952198
M20
25170119583986
M24
28210173525784
M30
35270286059535
M36403303305011017

CHE-OXYGLUE-200 Vinylester

Rebar NumberHole Diameter (mm)Hole Depth (mm)Destroy Haul (kgf)Safety Haul (kgf)
#3 (Ø10)139035401180
#4 (Ø13)1612554801827
#5 (Ø16)
2014590603020
#6 (Ø19)25170141504717
#7 (Ø22)28200186306210
#8 (Ø25)32225231957732
#9 (Ø29)37260253408447
#10 (Ø32)402903212010707

Threaded Rod NumberHole Diameter (mm)Hole Depth (mm)Destroy Haul (kgf)Safety Haul (kgf)
M810802550850
M10139034551152
M121612054031801
M162014563032101
M20
2517081042701
M24
28210156555218
M30
352703129010430
M36403304430014767

CHE-OXYGLUE-20E Epoxy Acrylate

I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.